LeisureCat 6000 Islander


The proven and popular LeisureCat 6000 Islander. Designed for the serious day fisherman, with walk-around deck that includes two forward platforms for fly-fishing. The self-draining deck s fully moulded with a raised cockpit coaming and moulded side pockets forward and aft. Either side of the rear walk-through door are built-in fish/bait box and a storage box which can be fitted out as a live-bait tank.

A forward lounge seat has a hinged top with stowage under. An optional removable dual seat for helmsman and passenger is also available. There are moulded recesses for fire extinguisher and EPIRB to keep these necessities from catching unwary legs. The standard full-length wave-breaker and in-hull engine pods ensure a soft, dry ride.

The fast planing power catamaran hull is fitted with twin 90hp Honda 4-stroke engines, the test model raced across an offshore chop at 35 knots. As always, layout can be customized to suit your fishing or diving needs.

Tows easily behind the family sedan on dual-axle trailer.
Basic Specifications are:

LOA (including engines) 6.89m (22’7″)
Length Moulded 6.00m (19’8″)
Beam 2.55m (8’3″)
Draft 0.40m (1’3″)
Wavebreaker Full length
Fuel storage system 2 x 180 litres (47.5 gal/US)
Dry hull weight 1480 kg (3262 lbs)
Weight including engines 1806 kg (3981 lbs)
Recommended power 2 x 70 to 115 hp 4-stroke outboards
Fully self-draining, non-skid deck

LeisureCat 6000 Islander General Features
  • Aquaguard Gelcoat used in laminate.
  • Fully-sealed, non-skid deck.
  • Twin heavy-duty battery switches in console.
  • Fibreglass lids with stays on storage area port and starboard.
  • Open storage areas x 4 in coamings.
  • Watertight hatches to moulded engine well areas.
  • Fully moulded engine wells included in hulls.
  • Full-length wavebreaker.
  • Hull solid single-skin construction with reinforced frames and laminated transom to suit engine selection.
  • Superstructure and cockpit deck moulding.
  • Solid single-skin and sandwich (foam core) construction including localized reinforcing for deck hardware.
  • Mould to incorporate walk-around cabin and twin front seat moulding.
  • Moulded console housing controls, electronics and radios.
  • Rubber gunwale rub rail.
  • Storage under front bench seat (hinged top).
  • FRP bulkheads (5) below deck – forward collision bulkhead watertight.
  • FRP footrests (2) to console.
  • Two(2) FRP fuel tanks – 150 litres per side (total 300 litres/79 gals/US) fitted with tank level senders.
  • Windscreen in smoked acrylic with anodised frames.
  • Foredeck sun-lounge with white UV cushion.
  • S/s bow roller.
  • S/s main deck bollard – split with pin.
  • S/s hand rails (2) to console.
  • S/s catches and hinges throughout.
  • Set of stern (x2) and midship (x2) cross bollards fitted.
  • S/s fuel deck filters (x2).
  • S/s recessed fuel tank breathers (x2).

Cockpit Area
  • Stainless steel bow rail.
  • Hard-top with stainless steel frame.
  • Removable helm bench seating with UV cushion.
  • Bolsters along inside of cockpit coaming.
  • Marlin board extension with dive ladder.
  • Stainless hand rails on swim platform.
  • Fire extinguisher in moulded recess.
  • Ritchie Explorer flush-mounted compass.
  • 406 mHz EPIRB in moulded recess.
  • Saltwater deckwash.

Mechanical and Electrical Features
  • VHF Radio – GME.
  • Plumb fuel lines and fitted fuel/water filters.
  • Binnacle station controls as supplied with engine package.
  • Single station hydraulic outboard steering package with wheel.
  • Two (2) 12 volt 2000gph electric bilge pumps fitted to motor well compartments with sure-bail float switches.
  • Bilge lines to discharge overboard through non-return valves.
  • Complete 12 volt electrical installation including all materials, switches, lights, tags, etc.
  • Navigation lights and removable anchor light.
  • BEP 6-gang DC splashproof switch fuse panel fitted at helm.

Safety Equipment
  • All under-floor compartments fitted with closed cell foam flotation as practicable.
  • Fire extinguisher in moulded recess.
  • Ritchie Explorer flush-mount compass.
  • EPIRB – 121/243mHz in moulded recess.

  • S/s rail around windscreen with rod holders.
  • Soft-top with stainless steel frame.
  • Freshwater supply.
  • Carpeted deck.
  • Live-bait tank fitted to rear coaming.
  • Decals and stripes.
  • S/s targa frame.

All LeisureCat are covered by a full 3-year structural warranty on hull and deck.
NOTE: LeisureCat Australia is constantly striving to improve and include new features, and, consequently, reserves the right to alter
any or all features without notification.

For more information, contact

UES INTERNATIONAL SDN BHD Composites Technology City, Batu Berendam Airport, 75350 Melaka,Malaysia
Phone : +60 16 328 6152 / +606 335 7244
Email : sales@leisurecat.com

2 Egmont Road, Henderson, Western Australia. 6166
Phone :+61 419 049 863
Email : sales@leisurecat.com

Rusayl Branch
PO Box 216, Rusayl P.C. 124, Sultanate of Oman

Nizwa Branch
PO Box 1326, Nizwa, P.C. 611. Sultanate of Oman

Phone : +968 24161200 / +968 25449432
Email  : sales@leisurecat.com

Brands We Supply